Atrust t200W is a WES based thin client computer (WES 2009 / WES 7). It features Intel Atom 1.6GHz processor and bundles major communication and applications, for instance VMware View, Citrix XenDesktop, Citrix XenApp, Microsoft RDP ( with RemoteFX for WES 7), Local Browser and Media Player. For thin client users who require the Windows platform, dual display, smart card reading and more computing power in client side in a server-based computing environment, it is the best choice.

  • WES
  • FCC
  • CE
  • BSMI
  • NRTL
  • Citrix Ready HDX verified
  • VMware Ready
Dual display support
t200W is designed to support dual displays (RGB and DVI-D).
Smart card reader and legacy serial port
t200W has a built-in smart card reader for higher authentication standard and a legacy serial port for supporting earlier devices.
Durable quiet design
The efficient thermal design of the t200W eliminates the need for traditional fans, increasing system stability and extending product lifetime. This also improves the workplace environment, because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS people to set different privilege levels for individual t200W clients. MIS people can also install/remove applications in/from t200W from a remote site via internet. Devices such as USB ports in t200W can be enable/disable by MIS people from a remote site as well.
Slim robust design
t200W is feather light weighing, only 1.0kg. It is the best choice to replace traditionally bulky desktops in a server-based computing environment.
Low power consumption
t200W consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Low total cost of ownership
t200W requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.



Intel Atom N270 1.6GHz
Intel 945GSE + Intel ICH7M
System memory
1GB (WES 2009) / 2GB (WES 7)
Flash memory
1GB (WES 2009) / 4GB (WES 7)
Graphics processor
Intel 945GSE integrated
Video memory
8MB shared memory for Intel 945GSE integrated
Maximum resolutions
1920 x 1200
VGA-type video output (D-sub 15) / DVI-D type video output
I/O ports
1 VGA, 1 DVI-D, 3 front USB, 2 rear USB, 1 RS232, 1 RJ45,1 headphone, 1 microphone, 1 DC IN, 1 Kensington lock slot,1 smart card reader (Manufacturing option)
Gigabit Ethernet
(W) 179 x (D) 44 x (H) 179 mm
1.0Kg (approximate)
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Non-operating temperature
-30℃ ~ 60℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95%
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
Output voltage
+12V DC
Idle power
Idle power for one display is around 10.4W
Operating system
Windows Embedded Standard 2009
Windows Embedded Standard 7
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Citrix ICA/HDX, Microsoft RDP, VMware Horizon View
Network standard
Gigabit Ethernet, DHCP, SSL, PPPoE, Wake on LAN
Smart Card Reader (Manufacturing option)
WiFi 802.11 b/g/n (Manufacturing option)

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information


Product ModelDescriptionVersionSizeDownload
t200WSpecification1.0363.4 KBSpecification

1 Power LED 10 USB Port
Lights blue when t200W is powered on. Connect USB devices, such as a keyboard or mouse.
2 Power Button 11 RS-232 Port
Press to power the t200W on or off. Connect a serial cable to this port.
3 SSD LED 12 USB Port
Lights yellow when the SSD is accessed. Connect USB devices, such as a keyboard or mouse.
4 Smart Card Reader 13 VGA (Port 1)
Insert a smart card into this slot (optional). Connect an RGB cable to this port.
5 Headphone Port 14 DVI-D (Port 2)
Connect headphones to this jack. Connect a DVI-D cable to this port.
6 Microphone Port 15 LAN Port
Connect a microphone to this jack. Connect an RJ-45 Gigabit Ethernet cable to this port.
7 USB Port 16 DC IN
Connect USB devices, such as a keyboard or mouse. Connect the supplied power cable to this port.
8 USB Port 17 Kensington Lock
Connect USB devices, such as a keyboard or mouse. Attach the t200W to a permanent object with the Kensington slot and a security cable.
9 USB Port
Connect USB devices, such as a keyboard or mouse.
* The above information is subject to change without notice.
* The accessories picture is for reference only.