Atrust t200LQ is a Linux based thin client computer. It features Intel Atom 1.6GHz processor and S3 graphic processor supporting up to four displays. It also bundles major protocols and applications, for instance VMware View, Citrix XenDesktop, Citrix XenApp, Microsoft RDP, Local Browser, PDF Reader and Flash Player. For thin client users who require a smart card reader, quad displays and more computing power in client side in a server-based computing environment, it is the best choice.

  • Atrust OS
  • FCC
  • CE
  • NRTL
  • Citrix Ready HDX verified
  • VMware Ready
Quad display support
t200LQ is designed to support four displays with one RGB, DVI-D, and two DVI-I. With the built-in Intel Atom 1.6 GHz processor, t200LQ delivers the best performance among peer devices.
Smart card reader and legacy serial port
t200LQ has a built-in smart card reader for higher authentication standard and a legacy serial port for supporting earlier devices.
Durable quiet design
The efficient thermal design of the t200LQ eliminates the need for traditional fans, increasing system stability and extending product lifetime. This also improves the workplace environment, because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS people to set different privilege levels for individual t200LQ clients. MIS people can also install/remove applications in/from t200LQ from a remote site via internet. Devices such as USB ports in t200LQ can be enable/disable by MIS people from a remote site as well.
Slim robust design
t200LQ is feather light, weighing only 1.1kg. It is the best choice to replace traditionally bulky desktops in a server-based computing environment.
Low power consumption
t200LQ consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Low total cost of ownership
t200LQ requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.



Intel Atom N270 1.6GHz
Intel 945GSE + Intel ICH7M
System memory
Flash memory
Graphics Processor
Intel 945GSE integrated
S3 2300E (provides two additional DVI-I ports)
Video memory
8MB shared memory for Intel 945GSE integrated
Built-in 128MB dedicate video memory for S3 2300E graphics controller
Maximum resolutions
1920 x 1200
VGA-type video output (D-sub 15)
DVI-D type video output
2 x DVI-I type video output
I/O Ports
VGA, 1 DVI-D, 2 DVI-I, 3 front USB, 2 rear USB, 1 RS232, 1 RJ45, 1 headphone,
1 microphone, 1 DC IN, 1 Kensington lock slot,1 smart card reader (Manufacturing option)
Quad monitor support
Gigabit Ethernet
(W) 179 x (D) 44 x (H) 179 mm
1.1Kg (approximate)
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Non-operating temperature
-30℃ ~ 60℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95%
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
Output voltage
+12V DC
Idle power
Idle power for one display is around 14.5W
Operating system
Atrust OS
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Citrix ICA/HDX, Microsoft RDP, VMware Horizon View
Network standard
Gigabit Ethernet, DHCP, SSL, PPPoE, Wake on LAN
Smart Card Reader (Manufacturing option)

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information


Product ModelDescriptionVersionSizeDownload
t200LQSpecification1.0364 KBSpecification

1 Power LED 11 DVI-I (Port 3)
Lights blue when t200LQ is powered on. Connect a DVI cable to this port.
2 Power button 12 USB port
Press to power the t200LQ on or off. Connect USB devices, such as a keyboard or mouse.
3 SSD LED 13 RS-232 Port
Lights yellow when the SSD is accessed. Connect a serial cable to this port.
4 Smart Card Reader 14 USB port
Insert a smart card into this slot (optional). Connect USB devices, such as a keyboard or mouse.
5 Headphone Port 15 VGA (Port 1)
Connect headphones to this jack. Connect an RGB cable to this port.
6 Microphone Port 16 DVI-D (Port 2)
Connect a microphone to this jack. Connect a DVI-D cable to this port.
7 USB port 17 LAN Port
Connect USB devices, such as a keyboard or mouse. Connect an RJ-45 Gigabit Ethernet cable to this port.
8 USB port 18 DC IN
Connect USB devices, such as a keyboard or mouse. Connect the supplied power cable to this port.
9 USB port 19 Kensington Lock
Connect USB devices, such as a keyboard or mouse. Attach the t200LQ to a permanent object with the Kensington slot and a security cable.
10 DVI-I (Port 4)
Connect a DVI cable to this port.
* The above information is subject to change without notice.