HomeProductsThin Clientx86 WES basedt20

t20

Atrust t20 is a Windows® 10 IoT Enterprise OS based thin client. The Aspeed AST2500 BMC (Baseboard Management Controller) chip is also built in to help effective remote management on each t20 device. With the support of BMC which allows a system administrator to perform different monitoring and management tasks remotely without having to be physically located next to the system – such as firmware updating, BIOS installing and system hardware monitoring. The BMC will also notify the administrator via email if there is hardware abnormal. The BMC is an extremely efficient time saving tool – the administrator no longer needs to do the physically on-site checking.

Durable design
The t20's efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime.
Low total cost of ownership
Additional computing access is as simple as adding more I/O devices. The total cost of ownership is then drastically reduced.
Simple click and play
t20 connects to the host server with a Remote Desktop connection. Just click the shortcut for a Remote Desktop session, you can immediately start a session and enjoy the computing resources.
Rich remote user experience
With Citrix® ICA/HDX™, Microsoft® RDP with RemoteFX™ and VMware® Horizon View™, t10A can provide a rich, efficient, and “local” computing experience for remote users.
Easy management and maintenance
Since all computing tasks are mainly performed on a server, all hardware and software issues are significantly reduced on the client side. All user management, software installations, system management, and upgrades are done on a single server.

 

Processor
 Intel® Apollo Lake Quad Core X5-E3940 1.60GHz (Burst 1.80GHz) 
System memory
 4GB (Manufacturing option: 8GB) 
Flash memory
 128GB M.2 NVMe SSD 
Maximum resolution
 Up to 1920 x 1200 
I/O ports
 Front: 2 x USB 3.0, 2 x USB 2.0, 1 x Audio Out
Rear: 1 x VGA, 1 x HDMI, 2 x RS-232 port, 1 x RJ-45 (shared management), 1 x DC IN		 
Ethernet
 10/100/1000Mb 
Dimensions
 (W) 155 x (D) 109.6 x (H) 37 mm 
Weight
 834g (approximate)
* without VESA Mount Bracket, Adapter Holder, and Power Adapter		 
Cooling
 Fanless 
Operating noise
 No noise 
Operating temperature
 0℃ ~ 40℃ 
Non-operating temperature
 -30℃ ~ 60℃ 
Operating humidity (Rh)
 10% ~ 90% (non-condensing) 
Non-operating humidity (Rh)
 5% ~ 95% (non-condensing) 
Operating voltage range
 100 ~ 240 VAC 
Rated line frequency
 50 ~ 60 Hz 
Rated output current (max)
 3A 
Output voltage
 +12V DC 
Operating system
 Supporting:
(1) Windows 10 IoT 2016 LTSB
(2) Windows 10 IoT 2019 LTSC
(3) Windows Embedded POSReady 7		 
System Management
 IPMI 2.0 
Ingress Protection Rating
 IP50 
Accessory
 Power Adapter, Power Cord, VESA Mount Bracket, Adapter Holder

* All above specifications are subject to change without notice.

BMC features:

Server-grade remote management tool

- BMC is independent of the OS and is always available even when the OS is down.
- Fully compliant with Intelligent Platform Management Interface (IPMI) 2.0.
- Lower the operation cost by remote monitoring and control.
- Reduce the system downtime by automatic alerts and remote troubleshooting.

 
Easy-to-use Web Management Console

- The graphical user interface of the BMC web management console is intuitive and easy to use.
- The web management console is easily accessed by your favorite web browser: Chrome, Firefox, Safari, and Edge.

 
View t20 Information Remotely

- CPU and DIMM information.
- BIOS version and BMC firmware version.
- Serial Number and Part Number.
- System health.

 
System Monitoring
- Monitoring the system status from the BMC web console.
  •  • System alert status
  •  • System on/off status
  •  • Temperature
  •  • Voltage
  •  • Storage status

- Event log for checking system abnormal events, powered on/off events, etc.
- Automatic alert abnormal status through Email or SNMP.
- Configure the power action to be automatically executed when an abnormal situation occurs.

 
Remote Control and Troubleshooting
- View and control the remote desktop.
  •  • The hardware-based remote control solution allows an administrator to view and control the system remotely at any situation: BIOS setup screen, boot process, and when the OS is running.

- Remote Power Control: Shutdown or power on the system remotely.
- Automatic Crash & Boot video capture.

 
Ease Maintenance Tasks
- Remote BIOS update
- Remote BMC firmware update
- Remote OS installation

 

Product ModelDescriptionVersionSizeDownload
t20Specification1.0537.4 KBSpecification

1 Headphone Port 6 DC IN
Connects to a headphone or speaker system. Connects to an AC adaptor.
2 USB 2.0 Port x 2 7 VGA Port
Connects to a USB device. Connects to a monitor.
3 USB 3.0 Port x 2 8 LAN Port
Connects to a USB device. Connects to a host server through a LAN switch.
4 Power LED 9 HDMI Port
Indicates the status of power. Connects to a monitor.
5 Power Button 10 RS-232 Port x 2
Press to turn on/off the client. Connects to a serial port device.
* The above information is subject to change without notice.
* The accessories picture is for reference only.