t225W

Atrust t225W is a Windows Embedded OS based thin client computer. Developed by Atrust, the ACS (Atrust Client Setup) software is also built in to help effective management of t225W. With the support of Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™ and VMware® Horizon View™, t225W can be used to create virtual and session-based desktop experiences from many remote desktop capable operating systems. t225W offers a rich computing experience where applications look, feel, and behave as local devices, including high-definition multimedia content.

Software
  • WES
Dual display support
t225W is featuring two DisplayPort for dual display, up to 4096 x 2160@60Hz resolution.
Durable and quiet design
t225W’s efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime. The t225W also improves workplace quality because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS staff to set different privilege levels for individual t225W clients. MIS staff can also install/remove applications in/from t225W from a remote site via internet. Devices such as USB ports in t225W can be enable/disable by MIS staff through the same way.
Low power consumption
t225W consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Lower total cost of ownership (TCO)
t225W requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.
Supported Protocols
t225W supports the following protocols:
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™, VMware® Horizon View™

 

Processor
Intel Apollo Lake N4200 Quad Core 1.10 GHz (Turbo 2.50 GHz)
System memory
4GB (Manufacturing option : 8GB)
Flash memory
16GB (Manufacturing option : 32GB, 64GB)
Maximum resolutions
DVI-I / DVI-D : 1920 x 1200, DisplayPort : 4096 x 2160@60Hz
I/O ports
Front: 4 x USB 2.0, 1 x USB 3.1 Gen 1, 1 x Audio Out, 1 x Microphone In,
Rear: 1 x DVI-I, 1 x DVI-D, 2 x DisplayPort, 2 x USB 3.0, 1 x RJ-45, 1 x DC IN
* Maximum Dual Display.
Ethernet
10/100/1000Mb
Dimensions
(W) 45.6 x (D) 189 x (H) 204 mm
Weight
1.1 Kg (approximate)
Cooling
Fanless
Operating noise
No noise
Operating temperature
5℃ ~ 35℃
Non-operating temperature
-30℃ ~ 60℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95% (non-condensing)
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
3.42A
Output voltage
+19V DC
Operating system
Windows® 10 IoT Enterprise 2016 LTSB
Management
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Protocols
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™,
VMware® Horizon View™ (PCoIP/RDP/Blast)
Manufacturing options
Dual Core CPU
WiFi : IEEE 802.11a/b/g/n/ac
RS-232 Port x 4
TPM

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information

 

Product ModelDescriptionVersionSizeDownload
t225WSpecification1.0328.6 KBSpecification

1 Power Button 9 DVI-I
Press to turn on/off the client. Connects to a monitor.
2 Power LED 10 DisplayPort
Lights blue when powered on. Connects to a monitor.
3 Microphone Port 11 DVI-D
Connects to a microphone. Connects to a monitor.
4 Headphone Port 12 USB 3.0 Port
Connects to a set of headphones or speaker system. Connects to a USB device.
5 USB 2.0 Port x 4 13 USB 3.0 Port
Connects to a USB device. Connects to a USB device.
6 USB 3.1 Gen 1 14 LAN Port
Connects to a USB 3.1 Gen 1 device. Connects to a local area network.
7 Kensington Lock Slot 15 DC IN
Connects a Kensington cable to secure the thin client. Connects to an AC adaptor.
8 DisplayPort
Connects to a monitor.
* The above information is subject to change without notice.
* The accessories picture is for reference only.