Atrust t175W is a Windows® Embedded OS based thin client computer. Developed by Atrust, the ACS (Atrust Client Setup) software is also built in to help effective management of t175W. With the support of Citrix® ICA/HDX™, Microsoft® RDP™ with
RemoteFX™ and VMware® Horizon View™, t175W can be used to create virtual and session-based desktop experiences from many remote desktop capable operating systems. t175W offers a rich computing experience where applications look, feel, and
behave as local devices, including high-definition multimedia content.

  • WES
  • CE
  • CCC
  • VCCI
  • Citrix Ready HDX 3D Pro verified
  • Citrix Ready HDX verified
Dual display support
t175W is featuring DVI-I and DVI-D for dual display, up to 1920 x 1200 resolution.
Durable and quiet design
t175W’s efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime. The t175W also improves workplace quality because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS staff to set different privilege levels for individual t175W clients. MIS staff can also install/remove applications in/from t175W from a remote site via internet. Devices such as USB ports in t175W can be enable/disable by MIS staff through the same way.
Low power consumption
t175W consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Lower total cost of ownership (TCO)
t175W requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.
Supported Protocols
t175W supports the following protocols:
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™, VMware® Horizon View™


Intel® Braswell Quad Core 1.04GHz (Turbo 2.0G)
System memory
4GB (Manufacturing option: 8GB)
Flash memory
Maximum resolution
Up to 1920 x 1200
I/O ports
Front: 2 x USB 2.0, 1 x Microphone port, 1 x Headphone port,
Rear: 1 x DVI-I, 1 x DVI-D, 2 x USB 3.2 Gen 1, 1 x RJ-45, 1 x DC IN, 1 x Kensington lock slot
(W) 39.5 x (D) 103 x (H) 143 mm
442g (approximate)
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Non-operating temperature
-30℃ ~ 60℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95% (non-condensing)
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
Output voltage
+12V DC
Operating system
Windows® 10 IoT Enterprise 2016 LTSB
Windows®10 IoT Enterprise 2019 LTSC

* 4GB system memory / 32GB flash memory is the minimum requirement for Windows® 10 IoT for Thin Clients
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™,
VMware® Horizon View™(PCoIP/RDP/Blast)
Manufacturing options
* The dimensions would become (W) 39.5 x (D) 103 x (H) 151 mm if goes with WiFi.

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information


Product ModelDescriptionVersionSizeDownload
t175WSpecification1.0410.5 KBSpecification

1 Power LED 7 DVI-I Port
Indicates the status of power. Connects to a monitor.
2 Power Button 8 DVI-D Port
Press to turn on/off the client. Connects to a monitor
3 Microphone Port 9 USB 3.2 Gen 1 Port x 2
Connects to a microphone. Connects to a USB device.
4 Headphone Port 10 LAN Port
Connects to a microphone. Connects to a host server through a LAN switch.
5 USB 2.0 Port x 2 11 DC IN
Connects to a USB device. Connects to an AC adaptor.
6 Kensington Lock Slot
Connects a Kensington cable to secure the thin client.
* The above information is subject to change without notice.
* The accessories picture is for reference only.