Atrust t180L is a Linux-based thin client device especially designed for a client/server computing environment. Developed by Atrust, the ACS (Atrust Client Setup) software is also built in to help effective management of t180L. With the support of Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™ and VMware® Horizon View™, t180L can be used to create virtual and session-based desktop experiences from many remote desktop capable operating systems. t180L offers a rich computing experience where applications look, feel, and behave as local devices, including high-definition multimedia content.

  • Atrust OS
  • FCC
  • CE
  • BSMI
  • NRTL
  • VCCI
Dual display support
t180L is featuring DVI-I and DVI-D for dual display, up to 1920 x 1200 resolution.
Durable and quiet design
t180L’s efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime. The t180L also improves workplace quality because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS staff to set different privilege levels for individual t180L clients. MIS staff can also install/remove applications in/from t180L from a remote site via internet. Devices such as USB ports in t180L can be enable/disable by MIS staff through the same way.
Compact and robust design
t180L weighs 446g (approximate) in a compact enclosure keeping desk space usage to a minimum. Flexible mounting option can let you position it behind a monitor.
Low power consumption
t180L consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Lower total cost of ownership
t180L requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.


Intel® Bay Trail Quad Core 1.83GHz
System memory
Flash memory
Maximum resolutions
Up to 1920 x 1200
I/O ports
Front: 2 x USB 2.0, 1 x Microphone port, 1 x Headphone port,
Rear: 1 x DVI-I, 1 x DVI-D, 1 x USB 3.0*, 1 x USB 2.0, 1 x RJ45, 1 x DC IN, 1 x Kensington lock slot

* By default, your USB configuration is set to use USB 2.0 Host Controller specification (for all USB ports, including the USB 3.0 port) to get full support in all virtualization environments. Otherwise, all or part of your USB-based devices will not be accessible in Citrix or VMware virtual desktops.

To use USB 3.0 Host Controller specification, please switch your USB mode from EHCI to XHCI in BIOS.
Gigabit Ethernet
(W) 39.5 x (D) 103 x (H) 143 mm
446 g (approximate)
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Non-operating temperature
-30℃ ~ 60℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95%
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
Output voltage
+12V DC
Power consumption : Suspend / Idle / Active
0.52W / 7.92W / 8.74W
Operating system
Atrust OS
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™,
VMware® Horizon View™ (PCoIP/RDP/Blast)

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information


Product ModelDescriptionVersionSizeDownload
t180LQSG1.03.5 MBQSG
t180LSpecification1.1843.7 KBSpecification

1 Power LED 7 DVI-I Port
Indicates the status of power. Connects to a monitor.
2 Power Button 8 DVI-D Port
Press to turn on/off the client. Connects to a monitor.
3 Microphone Port 9 USB 2.0 Port
Connects to a microphone. Connects to a keyboard, mouse, or USB device.
4 Headphone Port 10 USB 3.0 Port
Connects to a headphone or a speaker system. Connects to a keyboard, mouse, or USB device.
5 USB 2.0 Port x 2 11 LAN Port
Connects to a USB device. Connects to a host server through a LAN switch.
6 Kensington Lock Slot 12 DC IN
Attach the t180L to a permanent object with the
Kensington slot and a security cable.
Connects to an AC adaptor.
* The above information is subject to change without notice.
* The accessories picture is for reference only.