Atrust t177L is a Linux-based thin client device especially designed for a client/server computing environment. Developed by Atrust, the ACS (Atrust Client Setup) software is also built in to help effective management of t177L. With the support of Citrix® ICA/ HDX™, Microsoft® RDP™ with RemoteFX™ and VMware® Horizon View™, t177L can be used to create virtual and session-based desktop experiences from many remote desktop capable operating systems. t177L offers a rich computing experience where applications look, feel, and behave as local devices, including high-definition multimedia content.

  • Atrust OS
Dual display support
t177L is featuring two DisplayPort for dual display, up to 3840 x 2160 resolution.
Durable and quiet design
t177L’s efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime. The t177L also improves workplace quality because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS staff to set different privilege levels for individual t177L clients. MIS staff can also install/remove applications in/from t177L from a remote site via internet. Devices such as USB ports in t177L can be enable/disable by MIS staff through the same way.
Low power consumption
t177L consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Lower total cost of ownership
t177L requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.
Supported Protocols
t177L supports the following protocols:
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™, VMware® Horizon View™


Intel® Braswell X5-E8000 1.04G Quad Core(Turbo 2.0G)
System memory
2GB(Manufacturing option : 4GB)
Flash memory
8GB(Manufacturing option : 32GB)
Maximum resolution
Up to 2560 x 1600 @60Hz, 3840 x 2160@30Hz
I/O ports
Front: 2 x USB 2.0, 1 x USB 3.2 Gen 1 Type C, 1 x Microphone port, 1 x Headphone port,
Rear: 2 x DisplayPort, 2 x USB 2.0, 2 x USB 3.2 Gen 1, 1 x RJ-45, 1 x DC IN, 1 x Kensington lock slot
10M/100M/1000M Ethernet
(W) 39.5 x (D) 103 x (H) 143 mm
448g (approximate)
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Non-operating temperature
-20℃ ~ 60℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95% (non-condensing)
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
Output voltage
+12V DC
Operating system
Atrust OS
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™,
VMware® Horizon View™(PCoIP/RDP/Blast)
Manufacturing options
* The dimensions would become (W) 39.5 x (D) 103 x (H) 151 mm if goes with WiFi.

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information


Product ModelDescriptionVersionSizeDownload
t177L1.0602.7 KBSpecification

1 Power LED 7 Kensington Lock Slot
Indicates the status of power. Connects a Kensington cable to secure the
thin client.
2 Power Button 8 DisplayPort x 2
Press to turn on/off the client. Connects to a monitor.
3 Microphone Port 9 USB 3.2 Gen 1 x 2
Connects to a microphone. Connects to a USB device.
4 Headphone Port 10 USB 2.0 Port x 2
Connects to a headphone or a speaker system. Connects to a USB device.
5 USB 2.0 Port x 2 11 LAN Port
Connects to a USB device. Connects to a host server through a LAN switch.
6 USB 3.2 Gen 1 Type C 12 DC IN
Connects to a USB device. Connects to an AC adaptor.
* The above information is subject to change without notice.
* The accessories picture is for reference only.