t10L

Atrust t10L is a Linux-based thin client device especially designed for a client/server computing environment. Developed by Atrust, the ACS (Atrust Client Setup) software is also built in to help effective management of t10L. With the support of Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™ and VMware® Horizon View™, t10L can be used to create virtual and session-based desktop experiences from many remote desktop capable operating systems. t10L offers a rich computing experience where applications look, feel, and behave as local devices, including high-definition multimedia content.

Software
  • Atrust OS
Certifications
  • FCC
  • CE
  • NRTL
  • VCCI
  • Citrix Ready HDX verified
Durable design
The t10L's efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime.
Simplified Management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS staff to set different privilege levels for individual t10L clients. MIS staff can also install/remove applications in/from t10L from a remote site via internet. Devices such as USB ports in t10L can be enable/disable by MIS staff through the same way.
Compact and robust design
t10L weighs 810g (approximate) in a compact enclosure keeping desk space usage to a minimum.
Lower power consumption
t10L consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Low total cost of ownership
Additional computing access is as simple as adding more I/O devices. The total cost of ownership is then drastically reduced.
Rich remote user experience
With Citrix® ICA/HDX™, Microsoft® RDP with RemoteFX™ and VMware® Horizon View™, t10L can provide a rich, efficient, and “local” computing experience for remote users.

 

Processor
Intel® Bay Trail Dual Core 1.58GHz
System memory
2GB
Flash memory
4GB
Maximum resolutions
Up to 1920 x 1200
I/O ports
Front: 1 x USB 3.0, 1 x USB 2.0, 1 x Microphone port, 1 x Headphone port,
Rear: 1 x DVI-I, 2 x USB 2.0, 1 x RS-232 port, 1 x RJ-45, 1 x DC IN
Gigabit Ethernet
10/100/1000Mb
Dimensions
(W) 155 x (D) 109.6 x (H) 37 mm
Weight
810g (approximate, with WiFi antenna)
Cooling
Fanless
Operating noise
No noise
Operating temperature
-20℃ ~ 55℃
Non-operating temperature
-40℃ ~ 80℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95% (non-condensing)
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
3A
Output voltage
+12V DC
Power consumption : Suspend / Idle / Active
0.45W / 4.67W / 5.71W
Operating system
Atrust OS
Management
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Protocols
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™,
VMware® Horizon View™ (PCoIP/RDP/Blast)
Regulatory
CB, NRTL, FCC, CE, VCCI
Option
WiFi Antenna

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information

 

Product ModelDescriptionVersionSizeDownload
t10LSpecification1.0671.7 KBSpecification

1 Microphone Port 7 DC IN
Connects to a microphone. Connects to an AC adaptor.
2 Headphone Port 8 LAN Port
Connects to a headphone or a speaker system. Connects to a host server through a LAN switch.
3 USB 3.0 Port 9 USB 2.0 Port x 2
Connects to a USB device. Connects to a USB device.
4 USB 2.0 Port 10 DVI-I Port
Connects to a USB device. Connects to a monitor.
5 Power LED 11 RS-232 Port
Indicates the status of power. Connects to a serial port device.
6 Power Button 12 Antenna (Manufacturing option)
Press to turn on/off the client. Connects to a wireless network.
* The above information is subject to change without notice.
* The accessories picture is for reference only.