Atrust t220WQ is a WE8S (Windows Embedded 8 Standard) based thin client computer supporting up to four displays. Developed by Atrust, the ACS (Atrust Client Setup) software is also built in to help effective management of t220WQ. With the support of Citrix ICA/HDX, Microsoft RDP with RemoteFX and VMware Horizon View, t220WQ can be used to create virtual and session-based desktop experiences from many remote desktop capable operating systems. t220WQ offers a rich computing experience where applications look, feel, and behave as local devices, including high-definition multimedia content.

  • WES
  • CE
  • NRTL
  • VCCI
  • VMware Ready Eng-User Computing
Quad display support
t220WQ supports three DVI-I and one DVI-D ports for quad display, up to 1920 x 1200 resolution.
Smart card reader
The smart card reader is offered as an option for higher authentication standard.
Durable and quiet design
t220WQ's efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime. The t220WQ also improves workplace quality because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS staff to set different privilege levels for individual t220WQ clients. MIS staff can also install/remove applications in/from t220WQ from a remote site via internet. Devices such as USB ports in t220WQ can be enable/disable by MIS staff through the same way.
Compact and robust design
t220WQ weighs 1.0Kg (approximate) in a compact enclosure keeping desk space usage to a minimum.
Low power consumption
t220WQ consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Lower total cost of ownership
t220WQ requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.


Intel® Bay Trail Quad Core 2.0GHz
System memory
Flash memory
8GB (Manufacturing option : 16GB, 32GB)
Maximum resolutions
Up to 1920 x 1200
I/O ports
Front: 2 x USB 2.0, 1 x USB 3.0, 1 x Audio Out, 1 x Microphone In,
Rear: 3 x DVI-I, 1 x DVI-D, 2 x USB 2.0, 1 x Serial port, 1 x RJ-45, 1 x Kensington lock slot,
1 x DC IN
Gigabit Ethernet
(W) 179 x (D) 44 x (H) 179 mm
1.0 Kg (approximate)
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating temperature
-30℃ ~ 60℃
Non-operating humidity (Rh)
5% ~ 95%
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
Output voltage
+12V DC
Power consumption : Suspend / Idle / Active
0.40W / 10.20W / 11.50W
Operating system
Windows® Embedded Standard 7 (WES7)
Windows® Embedded 8 Standard (WE8S)
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Citrix® ICA/HDX™, Microsoft® RDP™ with RemoteFX™,
VMware® Horizon View™ (PCoIP/RDP/Blast)
WiFi : IEEE 802.11a/b/g/n
Smart Card Reader
TPM (Trusted Platform Module)

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information


Product ModelDescriptionVersionSizeDownload
t220WQQSG1.02.1 MBQSG
t220WQSpecification1.2674.6 KBSpecification

1 Power LED 10 DVI-I
Lights blue when t220WQ is powered on. Connects to a monitor.
2 Power Button 11 RS-232 Port
Press to turn on/off the client. Connects to a serial port device.
3 SSD LED 12 LAN Port
Lights yellow when the SSD is accessed. Connects to a local area network.
4 Headphone Port 13 DVI-I
Connects to a set of headphones or speaker system. Connects to a monitor.
5 Microphone Port 14 DVI-D
Connects to a microphone. Connects to a monitor.
6 USB 3.0 Port 15 USB 2.0 Port
Connects to a USB device. Connects to a keyboard, mouse, or USB device.
7 USB 2.0 Port x 2 16 USB 2.0 Port
Connects to a USB device. Connects to a keyboard, mouse, or USB device.
8 Smart Card Reader 17 Kensington Lock Slot
Insert a smart card for identification, authentication
(Manufacturing option).
Attach your t220WQ to a permanent object with the Kensington slot and a security cable.
9 DVI-I 18 DC IN
Connects to a monitor. Connects to an AC adaptor.
* The above information is subject to change without notice.
* The accessories picture is for reference only.