Atrust t200L is a Linux based thin client computer. It features Atom 1.6GHz processor and bundles major protocols and applications, for instance VMware View, Citrix XenDesktop, Citrix XenApp, Microsoft RDP, Local Browser, PDF Reader and Flash Player. For client users who require dual display, a smart card reader and more computing power in client side in a server-based computing environment, it is the best choice.

  • Atrust OS
  • FCC
  • CE
  • BSMI
  • NRTL
  • Citrix Ready HDX verified
  • VMware Ready


Dual display support
t200L is designed to support dual displays(RGB and DVI-D).
Smart card reader and legacy serial port
t200L has a built-in smart card reader for higher authentication standard and a legacy serial port for supporting earlier devices.
Durable quiet design
t200L's efficient thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime. In the meantime, the t200L also improves workplace quality because of its noiseless design.
Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS people to set different privilege levels for individual t200L clients. MIS people can also install/remove applications in/from t200L from a remote site via internet. Devices such as USB ports in t200L can be enable/disable by MIS people from a remote site as well.
Slim robust design
t200L is feather light, weighing only 1.0kg. It is the best choice to replace traditionally bulky desktops in a server-based computing environment.
Low power consumption
t200L consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.
Low total cost of ownership
t200L requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.


Intel Atom N270 1.6GHz
Intel 945GSE + Intel ICH7M
System memory
Flash memory
Graphics processor
Intel 945GSE integrated
Video memory
8MB shared memory for Intel 945GSE integrated
Maximum resolutions
1920 x 1200
VGA-type video output (D-sub 15) / DVI-D type video output
I/O ports
1 VGA, 1 DVI-D, 3 front USB, 2 rear USB, 1 RS232, 1 RJ45, 1 headphone,1 microphone, 1 DC IN, 1 Kensington lock slot,1 smart card reader (Manufacturing option)
Gigabit Ethernet
(W) 179 x (D) 44 x (H) 179 mm
1.0Kg (approximate)
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Non-operating temperature
-30℃ ~ 60℃
Operating humidity (Rh) 
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95%
Operating voltage range
100 ~ 240 VAC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
Output voltage
+12V DC
Idle power
Idle power for one display is around 9.4W
Operating system
Atrust OS
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)
Citrix ICA/HDX, Microsoft RDP, VMware Horizon View
Network standard
Gigabit Ethernet, DHCP, SSL, PPPoE, Wake on LAN
Smart Card Reader (Manufacturing option)
WiFi 802.11 b/g/n ( Manufacturing option)

* All above specifications are subject to change without notice.

Atrust Device Manager is a powerful software for managing a large number of thin client devices in desktop virtualization infrastructure. It enables IT administrator to remotely deploy, manage, update clients, and assist users from a single computer. The administrator can manage and update clients simply and quickly in groups with a flexible and secure mechanism. Additionally, the IT administrator can remotely assist users in resolving problems or configuring local settings.

The key features of Atrust Device Manager are:
- helping the management of clients (without a pre-installed operating system) devices
- pushing custom settings to a large number of clients
- updating firmware and installing software packages for clients
- rebooting, powering off, and waking clients simply through the local network
- helping users to troubleshoot problems remotely
- identifying clients and managing IT assets with detailed client information


Product ModelDescriptionVersionSizeDownload
t200LSpecification1.0365.2 KBSpecification

1 Power LED 10 USB Port
Lights blue when t200L is powered on. Connect USB devices, such as a keyboard or mouse.
2 Power Button 11 RS-232 Port
Press to power the t200L on or off. Connect a serial cable to this port.
3 SSD LED 12 USB Port
Lights yellow when the SSD is accessed. Connect USB devices, such as a keyboard or mouse.
4 Smart Card Reader 13 VGA port (Port 1)
Insert a smart card into this slot (optional). Connect an RGB cable to this port.
5 Headphone Port 14 VGA port (Port 2)
Connect headphones to this jack. Connect a DVI-D cable to this port.
6 Microphone Port 15 LAN Port
Connect a microphone to this jack. Connect an RJ-45 Gigabit Ethernet cable to this port.
7 USB Port 16 DC IN
Connect USB devices, such as a keyboard or mouse. Connect the supplied power cable to this port.
8 USB Port 17 Kensington Lock
Connect USB devices, such as a keyboard or mouse. Attach the t200L to a permanent object with the Kensington slot and a security cable.
9 USB Port
Connect USB devices, such as a keyboard or mouse.
* The above information is subject to change without notice.
* The accessories picture is for reference only.